constant current versions - product specifcations model number output current (ma 5%) output voltage range (vdc) max output power (w) typical effciency pleddc200w-445-c0450- xx 450 149-445 200w 92% pleddc200w-285-c0700- xx 700 95-285 200w 92% pleddc200w-190-c1050- xx 1050 64-190 200w 91% pleddc200w-142-c1400- xx 1400 48-142 200w 91% pleddc200w-114-c1750- xx 1750 38-114 200w 91% pleddc200w-095-c2100- xx 2100 32-95 200w 91% pleddc200w-081-c2450- xx 2450 27-81 200w 90% pleddc200w-071-c2800- xx 2800 24-71 200w 90% pleddc200w-063-c3150- xx 3150 21-63 200w 90% pleddc200w-057-c3500- xx 3500 19-57 200w 90% pleddc200w-047-c4200- xx 4200 16-47 200w 89% pleddc200w-040-c4900- xx 4900 14-40 200w 89% pleddc200w-035-c5600- xx 5600 12-35 200w 89% pleddc200w-032-c6300- xx 6300 11-32 200w 88% pleddc200w-024-c8330- xx 8330 8-24 200w 88% constant voltage versions - product specifcations model number output voltage (vdc 5%) output current range (ma) max output power (w) typical effciency pleddc 200w-024 24 2083-8330 200w 88% pleddc 200w-032 32 1575-6300 200w 88% pleddc 200w-035 35 1400-5600 200w 89% pleddc 200w-040 40 1225-4900 200w 89% pleddc 200w-047 47 1050-4200 200w 89% pleddc 200w-057 57 875-3500 200w 90% pleddc 200w-063 63 788-3150 200w 90% pleddc 200w-071 71 700-2800 200w 90% pleddc 200w-081 81 613-2450 200w 90% pleddc 200w-095 95 525-2100 200w 91% pleddc 200w-114 114 438-1750 200w 91% pleddc 200w-142 142 350-1400 200w 91% pleddc 200w-190 190 163-1050 200w 91% pleddc 200w-285 285 175-700 200w 92% pleddc 200w-445 445 113-450 200w 92% -xx indicates dimming options are available. see options at left. blank = fxed current output electrical specifcations input voltage range: 100-277 vac nom. (90-305 v min/max), 108-250 vdc frequency: 50/60 hz nom. (47-63 hz min/max) power factor: >0.90 @ > 70% load, 120-277v inrush current: <30 amps max @ 277vac, cold start, full load input current: 0.96 amps max @ 230vac, 1.82 a max @ 120vac maximum power: 200w current regulation: 3% over input line variation load regulation: 4% thd: <_ 20% @ > 70% load, 120-277v ripple & noise: (vpk-pk) 5% vo max @ 20 mhz bw, full load output in parallel with 0.1 f ceramic & 10 f electrolytic ripple: (ipk-pk) 5% io max @ 20 mhz bw, full load output in parallel with 0.1 f ceramic & 10 felectrolytic. 120 hz component (flicker free) start-up time: 150ms typical @ full load, 120vac/60hz (1000ms max) leakage current: 0.68 ma max @ 120vac, 0.75 ma max @ 277vac hold up time: 30ms typical @ full load, 277vac protection: over-voltage, over-current, and short circuit (reset by power cycling) environmental specifcations minimum starting temp: -30oc maximum case temp. 90c storage temperature: -40oc to +85oc humidity: 5% to 95% cooling: convection vibration frequency: 5 to 55 hz/2g, 30 minutes sound rating: class a mtbf: 280,000 hours at full load and 40oc ambient conditions per mil-217f notice 2 emc: fcc 47cfr part 15 class b compliant impact resistance: 1g/s weight: 33.2 oz (940 grams) rev 8-26-15 ordering options: -d: 0-10v & resistance dimmable models dim 100-10%. two extra wires on the output side (+purple/-gray). compatible with most quality 0-10v wall dimmers. see page 3. -pd: pwm dimmable models. two extra wires on the output side(+purple/-gray). dims via positive 10% to 100% duty cycle, 200hz to 1khz, 0-10v pulse. see page 4. e332160 sign components manual pleddc-200w series, fixed output & dimmable ac or dc input flicker-free led drivers constant current & constant voltage with isolation black magic thermal advantage? aluminum housing ? total power: 200 watts ? input voltage: 100-277 vac nom. or 108-250 vdc ? ul dry & damp location rated ? ip66 & nema6 ? high power factor ? ul type hl rated for hazardous locations specifcations subject to change without notice. note: led drivers are designed and intended to operate led loads only. non-led loading may be outside the specifed design limits of our led drivers, and therefore cannot be covered by any warranty. if you desire to use our led drivers to operate non-led loads please contact us to discuss compatibility. thomas research products ? 1225 bowes rd ? elgin, il 60123 ? t 847-515-3057 ? f 847-515-3047 ? www.trpssl.com
pg 2 of 4 dimensions - inches (mm) 1.34 [ 34 ] 1.165 [ 29.6 ] 0.236 [ 6 ] 0.71 [ 18 ] 0.236 [ 6 ] 8.920.047 [ 2271.2 ] 9.34 [ 237.3 ] 8.54 [ 217 ] 0.16 [ 4 ] 12.0 min [ 305 min ] 12.0 min [ 305 min ] 2.33 [ 59.2 ] 0.31 [ 8 ] 1.47 [ 37.3 ] 0.390.04 [ 101 ] 0.390.04 [ 101 ] input black (l) white (n) green/yellow (g) ouput red (v+) blue (v-) dimming purple (dim+) gray (dim-) 2.240.12 [ 57.03 ] 2.240.12 [ 57.03 ] 4.0 [ 102 ] tc=90c wire specs: input leads: 18 awg, rated 600 v, 105c, min. output leads: 18 awg, rated 300 v, 105c, min. dimming leads: 22 awg, rated 300 v, 105c. all wires are stranded with solder dipped ends. ul conditions of acceptability see website for additional information 40% load pf power factor / load 60% 80% 100% 40% load thd thd / load 60% 80% 100% 1 20v a c 230vac 277vac 1 20v a c 230vac 277vac 0.800 0.825 0.900 0.875 0.850 0.925 0.975 0.950 1.000 0% 15% 10% 5% 25% 20% 30% typical efficiency / load 75% 70% 80% 85% 90% 100% 95% normalized output voltage efficiency 40% 60% 80% 100% 1 20v a c 230vac 2 77v a c 50 case hotspot temperature (c) lifetime (khrs) lifetime / case temperature full load @ 120vac 55 60 65 70 75 80 85 90 0 80 120 130 100 20 40 60 70 110 90 10 30 50 140 safety and emc compliance ul/cul ul8750 & can/csa-22.2 no. 250.13-12, ul1012/csa-c22.2 no.107.1 ce en 61347-1, en61347-2-13 fcc, 47cfr part 15 class b en 55015 limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment. en 61000-3-2 part 3-2: limits for harmonic current emissions class c, >80% rated power en 61000-3-3 part 3-3: limitation of voltage changes, voltage fuctuations and ficker . pleddc200w series note: life calculations are based on reliability with confdence using a 90% confdence level and <5% failure rate. at a confdence level of 90% it is expected that <5% of the parts will fail at the rated life provided. (failure is defned as a driver drifting outside specifcation, rather than fail to operate) thomas research products ? 1225 bowes rd ? elgin, il 60123 ? t 847-515-3057 ? f 847-515-3047 ? www.trpssl.com ssl solutions faster than the speed of light ?
pg 3 of 4 notes: 1. 0-10v dimmable version comes with an extra two wires +purple/-gray on the output side. 2. compatible with most 0-10v wall slide dimmers and direct 0-10v analog signal. recommended dimmer is leviton ip710 or equivalent 3. 0-10v dimmable version is not intended to dim to zero (off). will be iout <10% @ vdim <1.0v 4. 0-10v dimmable version output will be 100% with purple/gray open and minimum with purple/gray shorted. "-d" option: 0-10vdc and resistance dimming 0v 1v 2v 3v 4v 5v 6v 7v 8v 9v 10v d i mmi n g i n p u t ( v dc) o u t put c u rre n t / 0 - 1 0 v dc d i mmi ng i nput 0 1 0 2 0 3 0 4 0 5 0 6 0 7 0 8 0 9 0 100 outpu t cu rr ent % dim (+) purple ip710 wall dimmer pleddc200w-xxx-cxxxx-d dim (-) gray 3-wire dimming typical circuit pleddc200w-xxx-cxxxx-d3 20k potentiometer 10v output (yellow) 0-10v input (purple) return (gray) (dimmer must be current-sink type control) typical dimming circuit parameters minimum typical maximum 10v output, yellow wire 9.2v 10.0v 10.8v 10 output source current, purple wire 0ma 10ma absolute voltage range on 0-10v (+) purple wire -2.0v +15v source current out of 0-10v purple wire 0ma 2ma pleddc200w series thomas research products ? 1225 bowes rd ? elgin, il 60123 ? t 847-515-3057 ? f 847-515-3047 ? www.trpssl.com ssl solutions faster than the speed of light ?
pg 4 of 4 pwm in pwm positive dimming typical circuit pleddc200w-xxx-cxxxx-pd pwm (+) purple return (-) gray notes: 1. pwm dimmable version comes with an extra 2 wires +purple/-gray on the output side. 2. below 10% duty cycle proper dimming operation is not assured. unit is not intended to turn off at <10% duty cycle. 3. pwm dimmable version output will be 100% with purple/gray open and minimum with purple/gray shorted. "-pd" option: pwm dimming parameters minimum typical maximum absolute maximum voltage range on pwm input (purple wire) -2.0v 10v +15v input low level voltage range (purple wire) -2.0 0v +5.5v input high level voltage range (purple wire) +9.0 10v +15v current into pwm input (purple wire) 0ma 1.2ma source current out of pwm input (purple wire) 0ma 2ma pwm input signal frequency 500hz 1500hz pwm input signal positive duty cycle 0% 10-90% 100% 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% positive duty cycle o u t put c u rre n t / 1.0 khz positive duty cycle 0 1 0 2 0 3 0 4 0 5 0 6 0 7 0 8 0 9 0 100 outpu t cu rr ent % pleddc200w series thomas research products ? 1225 bowes rd ? elgin, il 60123 ? t 847-515-3057 ? f 847-515-3047 ? www.trpssl.com ssl solutions faster than the speed of light ?
|
